Keurig 2.0 Brewing Slow

In Keurig 242 views
Keurig 2.0 brewing slow caused by several things, such as a dirty machine, improper water reservoir position, and also exit needle that is blocked.
Currently, many coffee brewers have emerging on the market, one of which is a Keurig 2.0 Brewing System. Of course, this is intended to spoil the coffee lovers. By this coffee brewer, you do not need a lot of time to enjoy a cup of coffee even more. Only with a time of 25 seconds you can generate as many as 4 cups of coffee at a time. But, what if suddenly your machine is working slowly? Is there any problem? What’s the solution? In this article, the writer will talk about Keurig 2.0 brewing slow.
Exit Needle is Blocked
There are many possible reasons why your coffee brewer, Keurig 2.0 brewing slow suddenly. The first possibility is that coffee grounds are blocking the exit needle. How could this happen? There are two possibilities, the first, it occurs when a person brew the coffee without the lid in the K-Cup. And the second, it occurs because of the factory error, K-Cup that is not sealed properly. Both of them can make the ground get clogged in the exit needle that cause your coffee brewer brewing slow, so that you just produce a short cup of coffee and even no coffee. 
How do you solve the problem above? To fix this, you can use several ways. First, you need to remove the holder of the K-Cup first. After that, you should wash it off with warm water in its both sides, the top side and bottom sides. These steps usually can fix the problem. However, if these steps are not able to handle the issue, the exit needle is still blocked and Keurig 2.0 brewing slow, you need to use compressed air to resolve your problem.
Wrong Magnet Position
The second possibility why your Keurig 2.0 brewing slow is the position of the magnet in the water reservoir that is wrong. How do you solve this kind of problem? This is just a simple thing. You only need to lift the water reservoir then put it back in its place. Well, by doing so, you will find the position of the magnet that is wrong, not in proper place. Just fix the position of the magnet, and the water reservoir will be back in the right position. Well! Now, your Keurig 2.0 will return to normal operation.
The last possibility is that your coffee brewer is dirty. Dirty machine will cause your Keurig 2.0 brewing slow. How should you do? Yes, you certainly have to clean up your Keurig 2.0. First, open your brewer’s top, remove and clean the K-cup holder, then turn it back. And then you need to clean the removable drip-tray.
Machine is Dirty
Next, is cleaning water reservoir to solve the Keurig 2.0 brewing slow. First, you have to empty the water reservoir in the brewer, refill with undulated white vinegar. After that, run the brew cycles of the four large cups, leave it to stand for four hours to clean the vinegar. After vinegar has discarded, refill the reservoir with water. Run it back until “Add Water” is displayed on your brewer’s screen.

Tags: #brewing #keurig

author
Author: 
    6 Ways Keurig Prime Can Improve Your Business
    6 Ways Keurig Prime Can Improve Your Business
    6 Ways Keurig Prime Can Improve Your

    Leave a reply "Keurig 2.0 Brewing Slow"

    This site uses Akismet to reduce spam. Learn how your comment data is processed.


    Top
    x
    error: Content is protected !!